25P Recycler™ für kleine Projekte mit RASP Xtreme ™ Feed Unit
Artikelnummer:
Folgt noch!
Empfohlener Verkaufspreis:
Preis auf Anfrage.*
Maschinenbeschreibung
Der 25P Recycler™ ist nur für kleine Projekte mit RASP Xtreme ™ Feed Unit vorgesehen. Der Recycler ist pneumatisch angetrieben. Dieses 25P Recycler™ verfügt über eine begrenzte Produktionskapazität, ist jedoch sehr mobil für den Einsatz in Tank’s etc. Es kann durch eine 60cm (24inch) geführt werden. Zum Beispiel auf Schiffen.
Kleine Sponge-Jet Recyclers ™ – werden verwendet, um Staub, abgestrahlte Farbe und andere Materialien aus den wiederverwendbaren Sponge Media ™ zu trennen. Sponge-Jet Recyclers ™ sind Teil des Recycling-Prozesses. Maximale Grösse und der Flexibilität der aufbereiteten Sponge Media ™ anzubieten. Grössere Sponge-Jet Recyclers ™ haben höhere Durchsatzkapazitäten und entfernen einen grösseren Prozentsatz an feinen Verunreinigungen als kleinere Recyclers.
Weitere folgende Vorteile sind:
- Für kleine Projekte
Lieferumfang:
- 25P Recycler™
Technische Daten
Produktname | 25P Recycler™ |
Abmessungen: | Länge: 51 mm Tiefe: 51 mm Höhe: 117 mm |
Gewicht: | 63.5 kg (exkl. Strahlschlauch) |
Druckluftanschluss: | Folgt noch! |
Druckluftqualitat: | trocken, ölfrei und partikelfrei |
Arbeitsdruck: | min. 4 bar – max. 10 bar (max. 150 PSI) |
Füllmenge Strahlbehälter: | 170 Liter |
Druckluftverbrauch: | 0,3m³/min – 0,8 m³/min, (Taupunkt <10°C) |
Geräuschpegel: | 60dB(A) – 94dB(A) |
Hier finden Sie das Datenblatt mit den technischen Parametern
Features specific to the 25P Recycler™ are:
- Lightweight for ease of mobility
- Interlock system with RASP Xtreme for single-operator transport
- Fits in car or SUV
- Can be transported into small tanks and confined spaces
- Fits through most access hatches and man ways
- Light enough to manually pass down ship stairs
- Product Name: 25P Recycler™
- Part #: SJE-RE-25P
- Weight: 63.5 kg (140.00 lb)
- Length: 51 cm (20 in)
- Width: 51 cm (20 in)
- Height: 117 cm (46 in)
- Process Speed: 1.5 Kg (3.3 lb) per minute
Air Supply coupling: 2-Lug Chicago
Air Supply hose: 3 m (10 ft) by 18 mm (0.75 in) diameter
Integrated wheel system
Lifting eye for lowering into confined space
Moisture separator
Pressure regulator
Lubricator
*Weight is without shipping pallet, hoses, accessories.
** Process Speed is estimated on typical working mix. Actual times may vary.
Features:
Efficiently reduces abrasive consumption and dust emissions, separating good, reusable Sponge Media abrasives from dust, contaminants and/or potentially harmful waste, which might normally become airborne dust
- Decreases abrasive costs, freight, handling, clean-up and disposal costs up to 95% by reusing Sponge Media 6 to 15 times
- Separates used media into 3 streams: oversized waste, good reusable media and fine waste.
- Integrated locking wheel system for ease of transport
- Standardized parts and maximum reliability by design
- High-quality, industry-standard components for long, trouble-free operation, simplified spare part acquisition and replacement
- Multi-language labels, Instruction manuals and online training tools
- Extended service, motor and bearings minimize maintenance and downtime
- Screen size maybe changed for optimized flow and dust requirements
- Optional magnetic separator